Pelican PC600 Replacement Instruction

© 2016 Pelican Water Systems Rev B
3060 Performance Circle, Suite 2, DeLand, FL 32724
www. pelicanwater.com
(866) 767-6401
Replacing the Media for the Pelican PC600/PC1000
Carbon Series Whole House Filters
Complete Parts List
Table 1: Parts List
The riser tube may or may not be fixed inside the tank depending on the model. Follow all the directions
below if your model has a removable riser tube. If your model has a fixed riser tube, disregard the first
note below and leave riser tube as-is.
Figure 1
1. Turn the arrows on the Bypass Valve as shown to place the Bypass Valve into bypass mode.
2. Unscrew the Quick-Connects on the tank side of the Bypass Valve, leaving the Bypass Valve
connected to the plumbing. Unscrew and remove the head from the tank.
3. Pour the expired carbon media from the tank. It may be necessary to use a water hose to wash
the wet media from the inside of the tank. Dispose of the expired carbon media with normal
household debris.
Part Description Qty. Part Description Qty.
Red Cap
1 Blue Funnel 1
Carbon Media
** Depending on your system,
you could have multiple bags
of Carbon Media.
** PVC Reducer:
PVC 1" Male to ¾" Threaded
Female Adapter
1
PVC Female Hose Adapter:
1" to 1" Female Threaded
Adapter
1 ¾" PVC Hose Bib 1
Bypass Valve Bypass Valve
UPFLOW
INLET
DOWNFLOW
INLET
UPFLOW
INLET
DOWNFLOW
INLET
UPFLOW
INLET
DOWNFLOW
INLET
Head
Tank
Head
Tan k
Head
Tank
Quick-Connect
Whole House Water Filter
© 2010

Pelican PC600 Specifications

General

Brand	Pelican
Model	PC600
Category	Water Dispenser
Language	English