3
2. Power off
3.Bluetooth pairing
1.Power on
Products Use:
When you open the Earbud charging/carry case, the earbuds should power on
automatically and will connect to your device if previously paired. If not previously
paired, you can pair to the Earbuds by accessing Bluetooth (more on that below).
The Earbuds will automatically power off when you place them back inside the
charging case and the close the case's lid. If your Earbuds are outside of the
case and have no devices to automatically connect to, they will automatically turn
off after 3 minutes.
When using the Pelios Earbuds for the first time, they will automatically go into
pairing mode when powered on. Open up the Bluetooth menu on the device you
wish to pair with your Earbuds and select "Pelios" from the Bluetooth list. The
Earbuds should connect within 3 seconds, with an indication sound playing to
denote a successful pairing.
To Next Page
Loading...