16
(ONLY CONCERNS EUROPE)
‘‘CE’’ STATEMENT OF CONFORMITY
MANUFACTURER PELLENC S.A.
ADDRESS QUARTIER NOTRE-DAME
ROUTE DE CAVAILLON - B.P. 47
84122 PERTUIS CEDEX (FRANCE)
PERSON/ENTITY AUTHORISED TO COMPILE THE TECHNICAL
DOSSIER
PELLENC S.A.
ADDRESS QUARTIER NOTRE-DAME
ROUTE DE CAVAILLON - B.P. 47
84122 PERTUIS CEDEX (FRANCE)
WE HEREBY DECLARE THAT THE EQUIPMENT HEREINAFTER REFERRED TO AS:
GENERIC DENOMINATION FIXION ATTACHER
FUNCTION INTENDED FOR ATTACHING VINE SHOOTS
COMMERCIAL NAME FIXION
TYPE FIXION
MODEL FIXION
SERIAL No.
29P00001 - 29P29999
29P30000 - 29P49999
COMPLIES WITH THE PERTINENT PROVISIONS OF THE MACHINES DIRECTIVE (2006/42/CE)
AND COMPLIES WITH THE PROVISIONS OF THE FOLLOWING OTHER EUROPEAN DIRECTIVES:
- ELECTROMAGNETIC COMPATIBILITY (2004/108/CE)
- LIMITATION OF THE USE OF HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT (2011/65/EU)
- RECYCLING AND RECOVERY OF ELECTRICAL AND ELECTRONIC WASTE (2012/19/EU)
THE FOLLOWING HARMONIZED EUROPEAN STANDARDS WERE USED:
- EN 55014-1 : 2006 + A1 : 2009 + A2 : 2011
- EN 55014-2 : 1997 + A1 : 2001 + A2 : 2008
- EN 60335-1 : 2013
THE FOLLOWING OTHER STANDARDS AND TECHNICAL SPECIFICATIONS WERE USED:
- EN 60745-1 : 2009 + A11 : 2010
- NF EN 60335-2-29 : 2004 + A2 : 2010
CONCLUDED AT PERTUIS, DATED 01/07/2015
ROGER PELLENC
CHIEF EXECUTIVE OFFICER
MACHINES DIRECTIVE 2006/42/CE.
To Previous Page
Loading...
