Why is my pellenc C45 losing power and the battery LED is flashing?
If your Pellenc Power Tool experiences power loss and the battery LED is flashing, it may be due to the repetition of 3 XL cuts, which causes the battery to limit the power for 30 seconds. Avoid performing an XL cut for 30 seconds to resolve this.
What to do if my Pellenc Power Tool no longer works?
If your Pellenc Power Tool stops working, try the following steps: 1. Switch off the battery and ensure the LED is off. 2. Check the battery charge level. 3. Verify the lead is connected and the cable thumb-wheel is tightened. 4. Turn the battery on, ensuring the LED illuminates. 5. Pull the trigger without wearing a glove. If the tool operates, inspect your glove's condition and conductivity, replacing it if necessary. 6. Press the trigger.
Why does my pellenc C45 Power Tool stop during use?
Your Pellenc Power Tool might stop during use if it has reached its temperature limit. Ensure that the tool is being used under the recommended conditions.
What to do if my pellenc C45 Power Tool doesn't start?
If your Pellenc Power Tool doesn't start, check the following: * Ensure the battery is switched on. * Recharge the battery if it is discharged.
General| Brand | pellenc |
|---|---|
| Model | C45 |
| Category | Power Tool |
| Language | English |
Provides overarching safety guidelines for operating electric pruning tools, covering work area and electrical safety.
Lists and specifies the mandatory and recommended personal protective equipment (PPE) for safe operation.
Explains the patented safety feature, Activ' Security, and how it functions.
Details the procedure for starting the tool when the Activ' Security feature is enabled.
Presents a maintenance schedule outlining the frequency for various checks and operations.
To Next Page
