pellenc C45 - Usage Modes

PRUNING SHEARS C45, C45-P150, C45-P200
163529-D
5.6.1. USAGE MODES
5.6.1.1.PRESENTATIONOFUSAGEMODES
Different operating modes are available to best suit the user's working habits (indicated on the display). The tool
offers 4 operating modes, depending on the operator's working preferences.
5.6.1.1.1.PROGRESSIVE(INCREMENTAL)MODES
Mode C1: PROGRESSIVE HALF OPENING
• Progressive operation with half-opening.
• The user controls the opening of the blades by press-
ing the trigger.
Mode C2: PROGRESSIVE (factory mode)
• When leaving the factory, the pruning shears are set
in "progressive" mode without half-opening.
• The user controls the opening of the blades by press-
ing the trigger.
5.6.1.1.2.ALL-OR-NOTHINGMODES
Mode C3: ALL-OR-NOTHING HALF OPENING
• Fast, "On/Off" operation, with half-opening.
• The blades are opened with a single pull of the trigger.
26