PRUNING SHEARS C45, C45-P150, C45-P200
163529-D
2. SAFETY
2.1. INTENDED USES
• The Pruning shears C45 is intended for vineyard, fruit-tree, olive-growing and landscape maintenance pruning
up to a diameter of 45 mm.
• The Pruning shears C45 must be used at ground level or from a suitable platform that is completely stable and
secure.
• The Pruning shears C45 is intended to be used outdoors.
• The Pruning shears C45 can be used with the C45-P150 and C45-P200 poles sold by the manufacturer.
• Only original or manufacturer approved spare parts (e.g. blade kit, maintenance kit) may be fitted to the Pruning
shears C45.
• The user is responsible for any accident resulting from improper use or unauthorised modification of the Pruning
shears C45.
• The Pruning shears C45 can be used with the C45-P150 and C45-P200 poles sold by the manufacturer.
• The C45-P150 and C45-P200 poles with shears are not intended to be used with shears other than the Pruning
shears C45 and the Pruning shears Prunion from the brand PELLENC .
2.2. GENERAL SAFETY INSTRUCTIONS FOR THE ELECTRICAL TOOL
Warning
Read all safety warnings, instructions, illustrations and specifications provided with this
power tool. Failure to follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
Note
Retain all the safety measures and instructions for later reading.
The term "power tool" in the safety warnings refers to your battery-powered electric tool (without power cord).
2.2.1. WORK AREA SAFETY
1. Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
2. Do not operate power tools in an explosive atmosphere, for example in the presence of flammable
liquids, gases, or dust. Power tools create sparks, which can ignite dust or fumes.
3. Keep children and bystanders away while operating the power tool. Distractions can cause you to lose
control of the tool.
2.2.2. ELECTRICAL SAFETY
1. The plugs of the electric tool must be adapted to the base. Never modify the plug in any way. Do not
use adapter plugs with earthed (grounded) power tools. Unmodified plugs and suitable sockets reduce the
risk of electric shock.
2. Avoid contact with earthed surfaces such as pipes, radiators, cookers, and refrigerators. There is an
increased risk of electric shock if your body is in direct contact with the ground.
3. Do not expose power tools to rain or damp conditions. Water entering a power tool will increase the risk
of electric shock (Except for tools for which an "IP" index is specified).
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges, and moving parts. Damaged or entangled cords increase the risk
of electric shock.
5. Use an extension cord suitable for outdoor use when operating power tools outdoors. Use a cord suitable
for outdoors to reduce the risk of electric shock.
7
To Next Page
Loading...
