PRUNING SHEARS C45, C45-P150, C45-P200
163529-D
8. STORAGE AND TRANSPORT
8.1. STORAGE
Note
It is possible to have the pruning shears serviced by an authorised repairer out of season. For more information,
consult an authorised distributor or contact PELLENC.
8.1.1. TOOL STORAGE
1. Switch off the tool.
See the operating instructions for the battery.
2. Disconnect the pruning shears from the battery.
See 4.8. Disconnecting the tool from the ULIB 150P and 250 batteries, page 18.
3. Clean the pruning shears.
See 6.6. Cleaning the tool, page 41.
4. Store the pruning shears in their carrying case away from heat, dust and moisture.
5. Storing the battery.
See the operating instructions for the battery.
Note
It is possible to have the pruning shears serviced by an authorised repairer out of season. For more information,
consult an authorised distributor or contact PELLENC.
8.1.2. STORAGE OF THE TOOL WITH A P150 OR P200 POLE
1. Switch off the tool.
See the operating instructions for the battery.
2. Disconnect the pruning shears from the battery.
See 4.8. Disconnecting the tool from the ULIB 150P and 250 batteries, page 18.
3. Remove the pole from the tool.
See the mounting instructions for the pole.
4. Clean the pruning shears.
See 6.6. Cleaning the tool, page 41.
5. Store the pruning shears in their carrying case away from heat, dust and moisture.
6. Store the pole cutting head in its protective cover away from heat, dust and moisture.
This equipment must be stored at temperatures of between -10° and +50°C.
7. Storing the battery.
See the operating instructions for the battery.
Note
It is possible to have the pruning shears serviced by an authorised repairer out of season. For more information,
consult an authorised distributor or contact PELLENC.
44
To Next Page
Loading...
