pellenc C45 - Introduction

PRUNING SHEARS C45, C45-P150, C45-P200
163529-D
1. INTRODUCTION
Dear Customer,
Thank you for purchasing your Pruning shears C45. Properly used and maintained, this equipment will give you
years of satisfaction.
Warning
Your device contains numerous recoverable or recyclable materials. Return it to your
dealer or, failing this, to an approved servicing centre to be treated.
Comply with the regulations in force in your country as concerns environmental protection associated with your
activity.
Warning
It is imperative that you read through the ENTIRE user’s manual guide before using or servicing
the tool. Always comply with the instructions and illustrations in the manual.
All through this user guide you will find advisory notes and information entitled: NOTE, IMPORTANT, ATTENTION
and WARNING.
Points marked “NOTE” indicate additional information.
Points marked "IMPORTANT" warn the user of a potential risk for the equipment.
Points marked “ATTENTION” warn the user of a potentially hazardous situations which if not avoided may result
in minor injuries.
Points marked “WARNING” warn the user of a potentially hazardous situation which if not avoided may result in
serious injury or death.
Warning indicates the guarantee will not cover any damage resulting from failure to comply with the procedures
and instructions, for which the owner will incur the repair costs.
Safety signs on the picker also indicate the safety precautions to be observed. Locate these signs and read them
before using your machine. Any partially illegible or damaged sign should be replaced immediately.
Refer to 2.5. Safety signs, page 10 for the location diagram of the safety stickers affixed to the tool.
No part of this manual may be reproduced without the written permission of the company PELLENC. The illustra-
tions provided in this manual are for information purposes only and are in no way contractual. The company PEL-
LENC reserves the right to make any modification or improvement to its products as deemed necessary without
informing customers already in possession of a similar model. This manual forms an integral part of the tool and
must accompany the tool if it changes hands.
6