PRUNING SHEARS C45, C45-P150, C45-P200
163529-D
5.3.2. STARTING THE TOOL WITH ACTIV' SECURITY DEACTIVATED
1. Turn on the battery.
See the operating instructions for the battery.
The battery beeps twice.
The Activ' Security LED (1) flashes red.
2. Take the tool into your hand.
3. Press the trigger (2) with the index finger of the hand
holding the tool.
The tool emits three alarm beeps to warn that the
Activ' Security feature is not activated.
The blade opens.
The tool is ready for use.
5.3.3. ACTIVATING ACTIV' SECURITY
Warning
Activ' Security is based on conduction and only works at its best when gloves are worn PEL-
LENC Activ' Security.
When working in wet conditions, wearing gloves PELLENC increases safety effectiveness.
If you put on gloves that you did not have at the beginning of the day or you replace your working
gloves during the day, make sure they are compatible with the Activ' Security by restarting the
tool and activating the security.
Warning
The safety system only protects the user holding the tool, any other person is not protected.
Activ' Security and gloves PELLENC reduce the risk of cuts, but the risk is still present. Always
be careful when using pruning shears.
Important
Carry out this operation without gloves. Do not wear gloves.
22
To Next Page
Loading...
