pellenc C45 - Table of Contents

PRUNING SHEARS C45, C45-P150, C45-P200
163529-D
TABLE OF CONTENTS
1. INTRODUCTION ..................................................................................................................... 6
2. SAFETY ................................................................................................................................... 7
2.1. INTENDED USES ............................................................................................................................. 7
2.2. GENERAL SAFETY INSTRUCTIONS FOR THE ELECTRICAL TOOL ......................................... 7
2.2.1. WORK AREA SAFETY ...................................................................................................................... 7
2.2.2. ELECTRICAL SAFETY ....................................................................................................................... 7
2.2.3. PERSONAL SAFETY ......................................................................................................................... 8
2.2.4. USE AND CARE OF THE POWER TOOL .......................................................................................... 8
2.2.5. BATTERY TOOL USE AND CARE ..................................................................................................... 8
2.2.6. MAINTENANCE ................................................................................................................................. 9
2.2.7. MANAGEMENT OF THE RECYCLING AND RECOVERY OF WASTE FROM YOUR TOOL ................... 9
2.3. SAFETY MEASURES RELATED TO THE USE OF THE BATTERY AND THE CHARGER"PEL-
LENC" ...................................................................................................................................................... 9
2.4. SAFETY WARNINGS FOR THE ELECTRONIC SHEARS ............................................................. 9
2.5. SAFETY SIGNS ............................................................................................................................. 10
2.5.1. SAFETY SIGNS FOR THE C45 ........................................................................................................ 10
2.5.2. SAFETY SIGNS FOR THE C45 FITTED WITH A P150 OR P200 POLE ............................................. 11
2.6. PERSONAL PROTECTIVE EQUIPMENT ..................................................................................... 12
3. DESCRIPTION AND TECHNICAL CHARACTERISTICS .................................................... 13
3.1. DESCRIPTION OF THE TOOL ...................................................................................................... 13
3.1.1. DESCRIPTION OF ONLY THE TOOL ............................................................................................... 13
3.1.2. DESCRIPTION OF THE TOOL FITTED WITH A P150 OR P200 POLE .............................................. 14
3.2. TECHNICAL FEATURES ............................................................................................................... 14
3.2.1. GENERAL CHARACTERISTICS OF THE TOOL ............................................................................... 14
3.2.2. BATTERY AND CHARGER COMPATIBILITY .................................................................................... 14
3.2.3. VIBRATION VALUES AND NOISE LEVELS ...................................................................................... 15
3.3. PRESENTATION OF ACTIV' SECURITY ..................................................................................... 16
4. START-UP ............................................................................................................................. 16
4.1. CONTENTS OF THE C45 + ULIB 150P BATTERY CASE .......................................................... 16
4.2. CONTENTS OF THE C45 + ULIB 250 BATTERY CASE ............................................................. 16
4.3. BOX CONTENTS OF THE P150 OR P200 POLE ........................................................................ 17
4.4. FITTING THE POLE ONTO THE TOOL ....................................................................................... 17
4.5. FITTING OF THE BATTERY ON THE HARNESS (ULIB 250 BATTERY) ................................... 17
4.6. FITTING THE HOLSTER TO THE BELT ...................................................................................... 17
4.7. CONNECTING THE TOOL TO THE ULIB 150P AND 250 BATTERIES ...................................... 17
4.8. DISCONNECTING THE TOOL FROM THE ULIB 150P AND 250 BATTERIES ........................... 18
4.9. PUTTING THE LEAD AND ARMBAND IN PLACE ...................................................................... 18
5. USE ....................................................................................................................................... 18
5.1. SWITCHING THE BATTERY ON AND OFF ................................................................................. 18
5.2. STARTING THE TOOL WITH ACTIV' SECURITY ACTIVATED (FACTORY SETTING) .............. 18
3