PRUNING SHEARS C45, C45-P150, C45-P200
163529-D
Mode C4: ALL-OR-NOTHING
• "All-or-nothing" operation without half-opening.
• The blades are opened with a single pull of the trigger.
5.6.1.2.CHANGINGUSAGEMODE
1. Connect the tool to the battery.
See 4.7. Connecting the tool to the ULIB 150P and 250 batteries, page 17.
2. Turn on the battery.
See the operating instructions for the battery.
3. Press the "mode" button on the battery.
4. Select modes C1, C2, C3 or C4 by pressing "+" or "-" ,
5. Press the "mode" button to validate.
27
To Next Page
Loading...
