Peltor MT53H7AWS2 - Peltor WS Headset Spare Parts and Accessories; Hygiene Kit (HY79); Single-Use Ear Protectors (HY100 A); Microphone Protectors (HYM1000)

14
Attenuation values (Table F:2)
1. Frequency in Hz
2. Average attenuation value in dB
3. Standard deviation in dB
4. APV
Radio specication (Bluetooth
®
):
Communication: Duplex
Frequency: 2.4–2.5 GHz
Range: Approx. 10 m (0 dBm)
Transfer rate: 1 Mbit/second
Output: 1 mW (0 dBm)
Frequency hopping: 1600 times/second
H. SPARE PARTS & ACCESSORIES
HY79 – Hygiene kit
Easily replaced hygiene kit that consists of two snap-in attenuation
inserts and ear cushions. Replace at least twice a year to ensure a
consistent level of attenuation, hygiene and comfort.
Clean single-use protectors – HY100A
Hygienic, single-use protector that is easy to apply to the ear cushions.
Supplied in packs of 100 pairs.
Mike Protector – HYM1000
Moisture and wind-resistant and hygienic. Effective protection that
extends the life of the microphone. Supplied in 5-metre pack that is suf-
cient for around 50 changes.
Wind mufer for microphone – M995
Effectively reduces wind noise, protects the microphone and extends its
life. One per package.
Rechargeable battery – ACK03 (EU), 88009-00000 (US)
NiMH rechargeable battery for replacing 2 x 1.5 V standard AA batteries
in most Peltor products.
Battery cover – 1173 SV
Battery cover made of impact-resistant polypropylene plastic.