EasyManua.ls Logo

Penn A421AEC-01C - User Manual

Penn A421AEC-01C
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
A421 Series Standard Electronic Temperature Controls Installation Instructions
Refer to the QuickLIT website for the most up-to-date version of this document.
1
Applications
The A421 Series Electronic Temperature Controls are
single-stage, electronic temperature controls with a
single-pole, double-throw (SPDT) output relay.
A421 controls feature a backlit LCD with adjustable
brightness and three-button touchpad interface that
can be set up to restrict user adjustments. An LED
indicates the output relay's On/Off status.
A421 controls have simple On and Off temperature
settings for heating or cooling, an adjustable anti-short
cycle delay, temperature setback, and sensor offset
capability. The temperature control range is
40 to 212°F or -40 to 100°C.
The A421 controls are available either in Type1
(NEMA), IP20 (CE), high-impact plastic enclosures
suitable for surface or DIN rail mounting (Figure 1)
or in Type 4X (NEMA), IP66 (CE) watertight, corrosion
resistant surface mount enclosures (Figure 2).
Dimensions
IMPORTANT: Use this A421 Series Electronic
Temperature Control only as an operating control.
Where failure or malfunction of the A421 control could
lead to personal injury or property damage to the
controlled equipment or other property, additional
precautions must be designed into the control
system. Incorporate and maintain other devices, such
as supervisory or alarm systems or safety or limit
controls, intended to warn of or protect against failure
or malfunction of the A421 control.
IMPORTANT: Utiliser CE A421 Series Electronic
Temperature Control uniquement en tant que
dispositif de régulation. Lorsqu'une défaillance ou un
dysfonctionnement du A421 control risque de
provoquer des blessures ou d'endommager
l'équipement contrôlé ou un autre équipement, la
conception du système de contrôle doit intégrer des
dispositifs de protection supplémentaires. Veiller
dans ce cas à intégrer de façon permanente
d'autres dispositifs, tels que des systèmes de
supervision ou d'alarme, ou des dispositifs de
sécurité ou de limitation, ayant une fonction
d'avertissement ou de protection en cas de
défaillance ou de dysfonctionnement du
A421 control.
Figure 1: A421 Control with Type 1 (NEMA),
IP20 Enclosure Dimensions, in. (mm)
Figure 2: A421 Control with Type 4X (NEMA),
IP66 Enclosure Dimensions, in. (mm)
A421 Series Standard Electronic Temperature
Controls
Installation Instructions
A421ABC-x, A421AEC-x,
A421GBF-x, A421GEF-x
Part No. 24-7664-3019, Rev. B
Issued November 6, 2015
Question and Answer IconNeed help?

Do you have a question about the Penn A421AEC-01C and is the answer not in the manual?

Penn A421AEC-01C Specifications

General IconGeneral
BrandPenn
ModelA421AEC-01C
CategoryController
LanguageEnglish

Summary

Mounting the A421 Controls

Mounting Type 4 X;IP66 Controls

Guidelines for mounting Type 4X/IP66 enclosures, including knockout removal and enclosure rotation.

Wiring the A421 Series Controls

Important Wiring Precautions

Crucial safety and operational notes for wiring, including conductor types and electrical ratings.

TB2 Terminal Block and SPDT Relay Output

Details on the TB2 terminal block and its connections for the SPDT relay output.

Setup and Adjustments

Parameter Codes and Modes of Operation

Explanation of parameter codes, operational modes (heating/cooling), and relay status.

Anti-Short Cycle Delay (ASd)

Setting the minimum time the output relay remains off before the next on-cycle.

Sensor Failure Mode (SF)

Configuring how the output relay operates during sensor or wiring failures.

Restricted Adjustment Mode

Limits user adjustment to only the OFF value within defined temperature stops.

A421 Control Parameter Setup Menus

Overview of Basic, Advanced, and Restricted setup menus for configuring control parameters.

Menu Navigation Guidelines

Instructions on navigating parameter codes and changing values using the control's buttons.

Basic Menu

Quickly editing On/OFF temperatures, SF, and ASd values.

Restricting User Adjustment

Limiting user control adjustments to specific parameters and ranges.

Troubleshooting

Troubleshooting Procedure

Steps to diagnose and resolve issues with voltage, sensor, or control operation.

Ordering Information

Technical Specifications

Related product manuals