To Next PageTo Next Page
Need help?Do you have a question about the PEN+GEAR C227-B and is the answer not in the manual?
Ensure the operator reads the manual for safety, operating instructions, and maintenance requirements before use.
Key safety precautions to prevent injury and damage during shredder operation.
Keep clothing, ties, hair, or small items away from the feed opening to prevent injury.
Keep the shredder in the OFF position when not in use for extended periods.
Avoid inserting hands or fingers into the shredder throat to prevent serious injury.
Always turn off or unplug the shredder before moving, cleaning, or emptying the wastebasket.
Ensure the wastebasket is emptied regularly to maintain operational efficiency.
Deactivate and disconnect power before moving, transporting, or cleaning the device.
Do not leave the shredder unattended, especially with children or pets nearby.
Never operate the device if the power cord is damaged.
This shredder is designed and intended for indoor use only.
Keep the machine away from children and pets as it is not a toy.
Operate for 30 minutes, then rest for 20 minutes to protect the machine.
Do not spray flammable gas or oil onto the shredder to prevent fire hazards.
Maximum shredding capacity is 16 sheets, 1 credit card, or 1 CD at one time.
Ensure the socket-outlet is installed near the equipment and easily accessible.
Keep fingers and other body parts away from hazardous moving parts.
Steps for initial setup, including bin insertion and power connection.
Instructions for operating the shredder using the sliding switch positions.
Automatic shredding starts when paper is inserted; stops when complete.
Reverses shredding direction to clear paper jams or correct errors.
Turns the shredder off and disconnects power for safety and storage.
Runs the shredder motor forward, indicated by the POWER light.
How the shredder responds to overloading and a full waste bin.
Common errors and their solutions for equipment malfunction and operational issues.
Troubleshooting steps for when the shredder is not working.
Solutions for when the shredder blades are blocked by paper.
Resolving issues where the cutter does not stop, possibly due to sensor obstruction.
Addresses loud noises from the shredder, often related to placement.
Measures to protect the shredder's motor from damage due to jams or overheating.
Machine reverses automatically if overloaded; resets after excess paper removal.
Cutter stops immediately when the bin is full; empty bin to reset.
Shredder will not operate when the bin is pulled out due to safety interlock.
List of materials that should not be shredded to prevent damage or hazards.
Detailed technical data including voltage, power, dimensions, and shredding capabilities.
Statement regarding compliance with FCC Rules for digital devices and potential interference.
General| Shred Type | Cross-Cut |
|---|---|
| Cool Down Time | 30 minutes |
| Power Source | AC |
| Voltage | 120V |
| Run Time | 3 minutes |
