SAFETY
When Servicing the Mixer
Disconnect PTO from tractor before entering the machine
Replace Guards.
Make sure the key is in your pocket before entering or working on the mixer.
OPERATING SAFETY
1. Read and understand the Operator’s Manual and all safety decals before using the
equipment.
2. Clean reflectors, slow moving vehicle signs, and lights before transporting.
3. Before applying pressure to the hydraulic system, make sure all components are tight
and that all lines, hoses, and couplings are in good condition.
4. Place all controls in neutral, stop the engine, set park brake, remove ignition key, and
wait for all moving parts to come to a complete stop before servicing or repairing.
5. Install and secure guards before starting.
6. Keep hands, feet, hair, and clothing away from all moving and/or rotating parts.
7. Do not operate when guards are missing or broken.
8. Clear the area of all bystanders, especially children, before starting.
9. Do not allow children to play on or around the machine.
10. Do not allow riders, on the PENTA TMR MIXER or tractor.
11. Be sure the PTO drive line guard telescopes and rotates freely on the shaft before
installation.
12. Stay away from overhead power lines when loading. Electrocution can occur without
contact.
13. Use hazard flashers on tractor when transporting on roads, and follow all local laws.
14. Attach securely to the tractor using a retainer on the drawbar, and a safety chain.
15. Do not operate with leaks in the hydraulic system or lubrication system.
16. Review safety instructions annually.
To Next Page
Loading...
