Need help?Do you have a question about the Pentair Pool Products Kreepy Krauly and is the answer not in the manual?
General| Warranty | 1 Year Limited |
|---|---|
| Type | Suction-side pool cleaner |
| Pool Type | In-Ground |
| Hose Length | 32 feet |
| Compatibility | Most in-ground pools |
Provides essential safety information regarding the operation and maintenance of the cleaner.
Outlines essential checks and preparations required before installing the Kreepy Krauly cleaner.
Details the terms, conditions, and exclusions of the limited warranty for the cleaner.
Clarifies the manufacturer's liability regarding pool finishes and the cleaner's impact.
Discusses factors affecting pool life and the cleaner's minimal impact on pool surfaces.
Lists all the components included with the Kreepy Krauly cleaner for verification.
Instructions on how to attach the Kreepy Krauly wings to the main body.
Details how to attach the pleated or starfish seal to the Kreepy Krauly footpad.
Instructions for attaching the roller bumper strap to the main body and swivel head.
Guidance on how to attach the dive float restrictor to the dive floats.
Explains how to assemble the hose sections and attach hose weights for proper buoyancy.
Step-by-step guide for installing the cleaner in a standard in-skimmer configuration.
Details the procedure for connecting the cleaner to a dedicated vacuum line using the regulator valve.
Explains how to determine and adjust the correct hose length for optimal cleaner operation.
Provides steps to achieve proper hose balance by adjusting weight placement for best cleaning.
Guides on positioning the eyeball diverter to optimize return line water flow for cleaner movement.
Addresses issues where the cleaner is not moving or pulsating correctly, listing potential causes.
Solutions for when the cleaner consistently remains in one section of the pool.
Troubleshooting steps for when the cleaner gets stuck on the main drain.
Guidance on identifying and fixing air leaks causing the cleaner to slow or stop.
Solutions for when the cleaner operates at an excessive speed, suggesting adjustments.
Troubleshooting steps for when the cleaner operates at the water surface or pulls air.
Solutions for when the cleaner gets stuck at the shallow end steps or swim-outs.
Advice on correcting repetitive movement patterns to ensure full pool coverage.
Solutions for when the cleaner gets stuck on various pool obstructions, suggesting accessories.
Instructions on how to remove debris that may be clogging the cleaner's flapper mechanism.
To Next Page
