Pentair Pool Products MAX-E-PRO User Manual

1
Should the installer or owner be unfamiliar
with the correct installation or operation of
this type of equipment you should contact
the distributor/manufacturer for the
correct advice before proceeding with the
installation or operation of the product.
An earth leakage or residual
current protection device must be fitted to
all installations.
OWNER’S MANUAL
Pool Products
MAX-E-PRO
TM
POOL PUMP
MaxEPro_OwnersManual_2012
Monday, 17 December 2012 10:03:44 AM

Pentair Pool Products MAX-E-PRO Specifications

General

Brand	Pentair Pool Products
Model	MAX-E-PRO
Category	Swimming Pool Pump
Language	English

Summary

Technical Specifications and Models

Pump Technical Data

Details specifications like pressure, temperature, IP rating, and electrical ratings.

Installation and Pressure Testing

Installation Guidelines and Warnings

Covers installation safety, electrical warnings, and system requirements.

Installation Details and Requirements

Pump Mounting and Location Requirements

Specifies conditions for pump mounting, ventilation, and stability.

Suction Safety and Compliance

Entrapment Protection Requirements

Mandates pump suction systems to prevent entrapment hazards.

Suction Outlet Cover Specifications

Electrical Safety and Connections

Grounding and Power Supply Safety

Emphasizes grounding the motor and using RCDs for electrical safety.

Voltage Matching and Wiring

Pump Priming Procedure

Priming Pump Steps and Guidelines

Instructions for priming the pump, including flooded and non-flooded systems.

Pump Disassembly Guide

Steps for Removing Old Seal

Detailed instructions for disassembling the pump to remove the old seal.

Pump Reassembly Guide

Installing New Seal and Reassembly

Procedures for installing a new seal and reassembling the pump components.

Troubleshooting Common Issues

Pump Failure and Clogging

Addresses symptoms like reduced capacity, leaks, and clogged parts.

Power and Motor Related Problems