To Next PageTo Next Page
Need help?Do you have a question about the Pentair BERKELEY HN Series and is the answer not in the manual?
General| Power Source | Electric |
|---|---|
| Model | HN Series |
| Frequency | 60 Hz |
| Material | Cast Iron |
| Application | Irrigation |
Emphasizes safety alerts and signal words for injury prevention.
Provides critical warnings and procedures for electrical hazards.
Covers operational safety, handling, and workspace management.
Guide for removing an old pump and preparing for new installation.
Detailed instructions for installing a well point for shallow well jet pumps.
Instructions for installing the pump in a cased well system.
Guidance for installing the pump for surface water sources.
Steps for connecting pump discharge to a pre-charged pressure tank.
Instructions for connecting pump discharge to a standard pressure tank.
Procedure for changing motor voltage settings between 115V and 230V.
Diagram and instructions for wiring the pressure switch correctly.
Detailed steps and safety precautions for electrical wiring connections.
Step-by-step guide on how to properly prime the pump and piping.
Visual breakdown of pump components for specific models.
Detailed parts list for various pump models and horsepowers.
Addresses problems like motor not running or running hot with overload.
Covers issues with no water delivery, low capacity, or frequent cycling.
Diagnoses air spurts, priming failures, and air leaks.
