Why is my Pentair NOCCHI BIOX delivering reduced water?
If your Pentair Water Pump is delivering less water than usual, the filter might be partially obstructed, so you should clean it. Also, check the delivery pipe for any obstructions and remove them. If the impeller is worn, consider replacing it. For three-phase versions, ensure the rotation is correct by inverting two phases.
What to do if Pentair Water Pump motor runs but does not deliver water?
If your Pentair Water Pump's motor runs but it's not delivering water, the filter might be obstructed, so you should clean it. Also, the non-return valve could be blocked; try cleaning or replacing it.
Why is my Pentair NOCCHI BIOX Water Pump working intermittently?
If your Pentair Water Pump is working intermittently, solids may be obstructing the impeller; remove any obstacles. Note that too warm liquid can cause this issue as well. In some cases, the motor may be broken, requiring you to call a dealer.
What to do if my Pentair NOCCHI BIOX Water Pump does not deliver water and the motor does not run?
If your Pentair Water Pump's motor isn't running and it's not delivering water, there could be several reasons. First, ensure the pump is correctly plugged in and that there is an electric current supply. Also, check if the circuit-breaker has tripped; if so, reinforce it, but call an electrician if it trips again. The impeller might be blocked, so remove any obstacles. If these steps don't resolve the issue, the motor or capacitor may be damaged, requiring you to call a dealer.
General| Category | Water Pump |
|---|---|
| Power Source | Electric |
| Protection class | IP68 |
| Motor insulation class | F |
| Maximum solid particle size | 50 mm |
| Type | Submersible |
| Material | Stainless Steel |
| Voltage | 230/400 V |
| Applications | Sewage, Wastewater, Drainage |
| Frequency | 50 Hz |
| Phase | Single-phase, Three-phase |
To Next Page