Pentair BIOSHIELD 522635 User Manual

Pentair BIOSHIELD 522635

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

IM PORTANT SAFETY INSTRUCTIONS

READ AN D FOLLOW ALL IN STRU CTIONS

SAVE TH ESE IN STRU CTIONS

INSTALLATION AN D

USER’S GUIDE

BIOSHIELD

®

UV DISINFECTION STERILIZER

Questions and Answers:

S
Samantha HuberAug 2, 2025
What to do if the Mandatory Leak Test indicates a leak in Pentair Water Filtration Systems?
- N
  Nichole MartinAug 2, 2025
  If the Mandatory Leak Test indicates a leak in your Pentair Water Filtration System, turn off the pool pump at the circuit breaker and ensure all flow to the unit has been stopped. Disassemble the unit. Ensure there are no cracks or breakages in the Quartz Sleeve, that the Quartz Sleeve Gasket is properly installed, and that the Quartz Sleeve Retaining Nut has been tightened down completely. Reassemble the Quartz Sleeve and repeat the Mandatory Leak Test until there are no indications of a leak.
M
Melinda BakerAug 17, 2025
Why is the GFCI/breaker tripping on my Pentair Water Filtration System?
- C
  Colleen BeckerAug 17, 2025
  If the GFCI/breaker is tripping with your Pentair Water Filtration System, immediately disconnect power to the BioShield® UV. Also, turn off the pool pump at the circuit breaker and ensure all flow to the unit has stopped. Check for water/moisture inside the quartz sleeve. Multiple appliances connected to a circuit protected by one GFCI create the potential for cumulative leakage current resulting in a tripped GFCI.

Pentair BIOSHIELD 522635 Specifications

General

Brand	Pentair
Model	BIOSHIELD 522635
Category	Laboratory Equipment
Language	English

Summary

Important Safety Instructions

Hazard Warnings and Precautions

Details on dangers, warnings, and cautions for safe operation and potential hazards.

Quartz Sleeve and UV Lamp Inspection

Installation

Quartz Sleeve Assembly and Installation

Detailed instructions for correctly assembling the quartz sleeve.

Assembly Instructions

Sterilizer Installation and Operation

Typical Installation

A plumbing diagram illustrating a common system setup.

Mounting The Vessel

Mandatory Leak Test

To Perform Mandatory Leak Test

Procedure to ensure seals are watertight before operation.

Electrical Connection

To Connect to a Pool Controller

Wiring instructions for connecting to a pool control system.

To Connect to a Timer Switch

Wiring instructions for connecting to a mechanical timer switch.

UV Lamp Installation

Power Cord Adjustment

Maintenance

Quartz Sleeve Cleaning

Winterizing

Troubleshooting

Leak Test Issues

Solutions for problems indicated by the leak test.

GFCI/Breaker Tripping

Guidance for resolving issues with GFCI or circuit breaker trips.

Related product manuals

Preview: Pentair BIOSHIELD

Pentair BIOSHIELD

Preview: Pentair SMART UV EU18-U

Pentair SMART UV EU18-U