Pentair BIOSHIELD - Hazardous Situations and Actions

6
BIOSHIELD
®
Commercial UV Sterilizer Installation and User's Guide
HAZARDOUS SITUATIONS & APPROPRIATE ACTIONS
SITUATION LOCATION HAZARD ACTIONS
Lamp or Quartz
Sleeve Removal
UV Vessel Burn
Isolate UV system from water source, shutdown
system using external On/ O switch and lock-out
disconnect from input power source.
Broken Quartz
Sleeves/ UV Lamps
UV Vessel Sharp Object
Handle quartz sleeves and UV lamps with extreme
care, wear clean cotton gloves.
UV Lamp
Replacement
UV Vessel
Blue-Light
Hazard
DO NOT operate UV lamps outside the UV vessel,
wear protective eye wear against ultraviolet light.
Drain UV Vessel UV Vessel Pressure
Isolate UV system from water source and shutdown
system using external On/O switch and lock-out/
disconnect from input power source. Open valves
carefully to relieve pressure and drain the UV Vessel.
Vessel Cleaning UV Vessel
Corrosive/
Chemical
Isolate the UV vessel and secure against unauthorized
operation. Wear appropriate protection equipment. No
smoking or food allowed.
Electrical Work UV System
Electrical
Shock
Shutdown system using the UV system’s external On/
O switch and lock-out/disconnect from input power
source. All electrical work should be carried out by
authorized and qualied personnel only.
SECTION 2: HEALTH AND SAFETY PRECAUTIONS