4.1 - Grab robotic cleaner by the front handle and place it
vertically, sitting on its rear bumpers on a flat surface.
4.2 - Insert your hands in each side of the filter canister
and simultaneously press both tabs to release the canis-
ter. Pull the Canister out and place it on a flat ground.
Debris is stored in the canister underneath the filter.
4.3 - Remove the filter.
4.5 - Clean canister with a hose.
4.4 - Clean the filter with a hose.
The robotic cleaner requires a clean filter to deliver optimum perfor-
mances as it only moves using jets from the impeller. The more clogged
the filter, the weaker the jets and the slower the robotic cleaner.
It is recommended to clean the robot after each cycle of use or when slowly slowing down
Cleaning of the robot cleaner 1/2
To Next Page
Loading...
