Pentair EasyTouch Installation Guide

1
Note: Refer to page 3 where (parts index number) is shown
EasyTouch/IntelliTouch Control System Upgrade Kits Installation Guide
Overview
This manual describes how to upgrade an EasyTouch or IntelliTouch Control System to the IntelliCenter
Control System.
The Upgrade Installation Kits apply to the following:
• EasyTouch
®
PL4/PSL4 Control Systems, EasyTouch
®
Control Systems
• IntelliTouch
®
Control Systems
Systems using the following Load Center or Power Center use the following kit part numbers:
• 2012 or newer (square low voltage circuit breaker configuration)
• P/N 522047 for i10P
• P/N 522048 for i10PS
• P/N 523049 for i10D
• System must be marked as UL listed/certified
EasyTouch
®
and IntelliTouch
®
Control System
Upgrade Installation Kits
IntelliCenter™ Control System Outdoor Control Panel
Pool Spa Features Lights
Air Temp 65° F
Schedule Usage Chemistry Status
3 3
8:00 A.M.
6.50
0
4
84°
78°
IntelliCenter Control System Outdoor Control Panel for EasyTouch or IntelliTouch Load Center or Power Center

Pentair EasyTouch Specifications

General

Lighting Control	Yes
Heater Control	Yes
Valve Control	Yes
Type	Pool and Spa Control System
Enclosure	Weatherproof
Water Features	Yes
Enclosure Rating	NEMA 3R
Control Type	Automated
Pump Control	Yes
Scheduling	Yes
Number of Circuits	4 or 8
Power Supply	120/240V