Do you have a question about the Pentair EASYTOUCH PL4 and is the answer not in the manual?
Model | EASYTOUCH PL4 |
---|---|
Type | Pool and Spa Control System |
Number of Circuits | 4 |
Automation | Yes |
Display Type | LCD |
Heater Control | Yes |
Valve Actuator Control | Yes |
Number of Valve Actuators Supported | 4 |
Number of Programmable Circuits | 4 |
Number of Feature Circuits | 0 |
Voltage | 120/240V |
Enclosure Type | Weatherproof |
Compatibility | Pentair products |
Details the system's components (panels, power center) and key features.
Explains menu navigation, modes, and button functions for panel operation.
Describes the display and button operations for indoor and wireless controllers.
Configuring clock, pumps, circuit names, functions, and custom names.
Settings for valves, 2-speed pumps, solar heating, delays, units, and remotes.
Configures memory, security, wireless address, power save, and panel synchronization.
Views software, performs self-tests, and understands error messages.
Diagnosing and fixing problems with indoor panels, iS4 remotes, and wireless remotes.
Verifying electronic connections and testing pumps, valves, and relays.
Transferring settings between panels and wiring the UltraTemp heat pump.
Visual guide to electrical connections for the Outdoor Control Panel.
Guidance on setting up two-speed pumps and activating solar heating.
Diagnosing and resolving issues related to air, water, and solar temperature sensors.
Understanding error codes generated during control panel self-tests for troubleshooting.
Monitoring IntelliChlor SCG status and resolving common error messages.
Diagnosing and fixing problems with indoor panels and iS4 spa-side remotes.
Addressing power, communication, range, and obstruction issues with wireless remotes.
Verifying electronic connections and testing pumps, valves, and relays.
Transferring settings between panels and wiring the UltraTemp heat pump.
Visual guide to electrical connections for the Outdoor Control Panel.
Definitions of key components and terms used in the manual.