To Next PageTo Next Page
Need help?Do you have a question about the Pentair INTELLIFLO VSD 2 Series and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Type | Variable Speed Pool Pump |
| Phase | Single |
| Efficiency | High Efficiency |
| Control | Digital Control Panel |
| Warranty | 3 Years |
| Port Size | 2 inch |
Provides essential steps for rapid setup and initial operation of the pump.
Details critical safety measures to prevent suction entrapment hazards in pools and spas.
Provides contact phone numbers, email addresses, and website for customer support.
Highlights dangers of electrical shock, electrocution, and hyperthermia from hot water.
Warns about increased risks from alcohol, drugs, medication, and child supervision.
Covers general installation warnings, location criteria, and electrical requirements.
Outlines essential precautions for operating and maintaining the pump safely.
Introduces the IntelliFlo® VSD 2 pump, its applications, and advanced features.
Explains how the pump communicates with external control systems like IntelliPool.
Lists the diverse features and programmable options of the IntelliFlo® VSD 2 pump.
Details the drive assembly, control panel, and communication ports.
Highlights the advanced features of the Permanent Magnet Synchronous Motor (PMSM).
Guides on using the operator control panel for pump operation and settings.
Explains the function of each button and the meaning of LED indicators on the keypad.
Describes the information displayed on the LCD screen, including speed, power, and status.
Details how to operate the pump using manual speed selection.
Explains the Egg Timer mode for timed speed operation.
Describes how to program speeds based on a 24-hour schedule.
Details settings for date, time, device, language, and password.
Explains programming for manual, schedule, and egg timer modes for speeds 1-8.
Covers menus for external control, time-out, quick clean, and priming.
Details settings related to thermal mode and pump temperature control.
Guides on priming the pump for the first time or after maintenance.
Highlights safety warnings and precautions to avoid damage or injury during priming.
Details filling the strainer pot and correctly reinstalling the lid.
Explains how to start the pump and adjust speed for effective priming.
Provides guidelines for selecting the optimal installation location for the pump.
Details piping requirements and electrical safety measures for installation.
Describes the optional kit for relocating the pump's control keypad.
Step-by-step instructions for wiring the pump, including safety precautions.
Lists the electrical input requirements and circuit protection for the pump.
