Pentair INTELLIFLO VSD 2 Series - Drive Assembly and Control Panel; Drive Assembly and Communication Ports; IntelliFlo VSD 2 Motor Features; Operator Control Panel Usage Guide

P-QSG-VSD2 - Rev. September 2017
7
INTELLIFLO VSD 2 - QUICK START GUIDE
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
ENGLISH
ESPAGNÕL
FEATURES ONTINUED
• Additional Features
• Clock and Timer
• Maximum and Minimum Speed Limits
• Quick Clean Mode
• Timeout Mode
• Rotatable Keypad
INTELLIFLO VSD 2 DRIVE ASSEMBLY AND ONTROL PANEL
The IntelliFlo
®
drive assembly consists of an operator control panel and the system electronics that drive the
motor. The drive microprocessor controls the motor by changing the frequency of the current it receives together,
with changing the voltage to control the rotational speed.
INTELLIFLO VSD 2 MOTOR FEATURES
• Permanent Magnet Synchronous Motor (PMSM)
• High efficiency (3450 RPM 92% and 1000 RPM 90%)
• Superior speed control
• Operates at lower temperatures due to high efficiency
• Same technology as deployed in hybrid electric vehicles
• Designed to withstand outdoor environment
• Totally enclosed fan cooled
• 10-Pole
• Low noise
OPERATOR ONTROL PANEL
USIN THE OPERATOR ONTROL PANEL
Use the operator control panel to start and stop the IntelliFlo
®
VSD 2 Variable Speed Pump, program, set, and
change speeds (RPM), and access pump features and settings.
IntelliFlo
®
VSD 2 Drive Assembly
Motor Stand
Operator Control Panel,
Buttons and LED
Strain Relief Port
for Incoming AC Power
Communication port for connection
to IntelliPool control system or
IntelliComm communication center via
two-wire RS-485 cable.