Pentair STA-RITE INTELLIFLO3 VSF - User Manual

IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
USER'S GUIDE
PENTAIR HOME
FOR INTELLIFLO3™ VSF AND INTELLIPRO3™ VSF
VARIABLE SPEED AND FLOW PUMPS
Des copies numériques de tous les manuels
IntellFlo3 VSF, ainsi que les versions traduites,
peuvent être trouvées sur www.pentair.com, ou
en scannant le code QR fourni.
• Guide d'installation et d'entretien (P/N 357974)
• Guide d'utilisation (P/N 357972)
Se pueden encontrar copias digitales de
todos los manuales de IntelliFlo3 VSF,
así como versiones traducidas en www.
pentair.com, o escaneando el código QR
proporcionado.
• Guía de instalación y servicio (P/N 357973)
• Guía del usuario (P/N 357971)
Digital copies of all IntelliFlo3 VSF manuals,
as well as translated versions, can be found
at www.pentair.com, or by scanning the
provided QR code.
• Install and Maintenance Guide (P/N 356231)
• User's Guide (P/N 356088)

Pentair STA-RITE INTELLIFLO3 VSF Specifications

General

Type	Variable Speed Pool Pump
Horsepower	3.0 HP
Voltage	230V
Programmable Speed Settings	Up to 8
Energy Efficiency	High
Energy Efficiency Certification	ENERGY STAR Certified
Communication Protocol	RS-485
Model	STA-RITE INTELLIFLO3 VSF
Port Size	2 inch
Motor Type	Permanent Magnet
Control Interface	Digital Display

Summary

Important Safety Instructions

General Safety Precautions

Covers general safety warnings, electrical shock risks, and pump usage guidelines.

Suction Entrapment Hazards

Details severe risks of entrapment from suction outlets, including limb, hair, and body entrapment.

Electrical Safety and GFCI Protection

Emphasizes connecting only to GFCI-protected circuits and proper testing procedures.

Introduction to Pentair Home App

Home Dashboard Overview

Explains the Pentair Home app's dashboard and its interactive elements for pool equipment control.

Initial Setup Guide

Creating a Pentair Home Account

Step-by-step guide for downloading the app, creating a user account, and setting up a profile.

Pairing Devices to Your Account

Instructions for connecting the pump to the Pentair Home account via Bluetooth and WiFi.

Pump Operation

Pump Dashboard Interface

Details the pump's main interface, including status, programs, and run data display.

Program Setup and Customization

Guides users on creating, customizing, and managing pump programs with various modes and settings.

Device Settings

Network and Connectivity Settings

Covers WiFi network connection, signal strength, and Direct Connect setup.

Pump Priming and Limit Parameters

Adjust pump priming cycles, speed, duration, and set speed, flow, and pressure limits.

Thermal Mode and Relay Configuration

Configure Thermal Mode for freeze protection and set up relay outputs for external devices.

Device Management and Security

Manage device security with a PIN, restore defaults, and remove the device from the account.

Troubleshooting

Connection Issue Troubleshooting

Provides steps to resolve issues related to weak WiFi, offline status, or Bluetooth connectivity problems.

System Alarms and Warnings

Understanding System Alarms

Explains alarm conditions such as Overheat, Over Current, and Internal Faults.

Interpreting System Warnings

Details warning conditions like Weak Wi-Fi Connection, Priming Failure, and Drive Derating.