EasyManua.ls Logo

Pentair MASTERTEMP Instructions

Pentair MASTERTEMP
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Rev. A 1-21-08 P/N 473756
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING
FOR YOUR SAFETY - READ BEFORE OPERATING
This product must be installed and serviced by a professional service technician qualified in pool/spa heater installation
and maintenance. Some jurisdictions require that installers be licensed. Check with your local building authority about
contractor licensing requirements. Improper installation and/or operation could create carbon monoxide gas and flue
gases which could cause serious injury or death. If you do not follow these instructions exactly, a fire or explosion may
result, causing property damage, personal injury or loss of life. Improper installation and/or operation will void the
warranty. For additional free copies of these instructions; call (800) 831-7133.
120/240 VAC NATURAL GAS/LP GAS
ASME MODELS Natural Propane
400K BTU/HR (MasterTemp) 460775 460776
400K BTU/HR (Max-E-Therm) 460763 460764
MasterTemp
®
and Max-E-Therm
®
POOL HEATERS
BYPASS ACCESS PLUG KIT (472648Z) INSTRUCTIONS
[ASME MODELS - ONLY]
Pentair Water Pool and Spa, Inc.
1620 Hawkins Ave., Sanford, NC 27330 (800) 831-7133 (919) 566-8000
10951 W. Los Angeles Ave., Moorpark, CA 93021 (800) 831-7133 (805) 553-5000
Visit us on the Internet @ www.pentairpool.com or www.staritepool.com
© 2008 Pentair Water Pool and Spa, Inc. All rights reserved.
This document is subject to change without notice.

Other manuals for Pentair MASTERTEMP

Question and Answer IconNeed help?

Do you have a question about the Pentair MASTERTEMP and is the answer not in the manual?

Pentair MASTERTEMP Specifications

General IconGeneral
ModelMASTERTEMP
CategorySwimming Pool Heater
BrandPentair
BTU Ratings125, 000 - 400, 000 BTU/hr
Fuel TypeNatural Gas or Propane
DisplayDigital display
Water Flow Rate20-120 GPM
Efficiency82% (Thermal Efficiency)
IgnitionElectronic
Voltage120V or 240V
Operating Pressure50 PSI (Maximum)
Temperature Range104°F
DimensionsVaries by model
WeightVaries by model
WarrantyLimited Warranty

Related product manuals