What to do if Pentair Swimming Pool Heater has defective gas controls?
- BBethany CoffeyJul 31, 2025
If there are defective gas controls, contact a serviceperson.
What to do if Pentair Swimming Pool Heater has defective gas controls?
If there are defective gas controls, contact a serviceperson.
How to fix Pentair Swimming Pool Heater that will not turn on?
If your Pentair Swimming Pool Heater is not coming on, verify that all electrical connections are correct and securely fastened. If they are, contact a serviceperson.
What to do if Pentair MiniMax NT LN is operating after pump shut off?
If the Pentair Swimming Pool Heater continues to operate after the pump has shut off, immediately shut off the gas supply and contact a serviceperson.
What to do if Pentair MiniMax NT LN Swimming Pool Heater exchanger is scaled?
If you notice that your Pentair Swimming Pool Heater exchanger is scaled, you should immediately shut off the gas supply and contact a serviceperson.
How to fix Pentair MiniMax NT LN that makes knocking noises?
Make sure all valves on the Pentair Swimming Pool Heater system are open if it makes knocking noises.
Model | MiniMax NT LN |
---|---|
Category | Swimming Pool Heater |
Efficiency | 82% |
Fuel Type | Natural Gas |
Heat Exchanger | Cupro-Nickel |
Ignition Type | Electronic Ignition |
Warranty | 1 Year |
Explains the HIN system and ID designators for Pentair Pool & Spa Heaters.
Covers heater introduction, important notices, and warranty information.
Lists installation code compliance and provides consumer safety guidelines for pool/spa use.
Details heater specifications, dimensions, plumbing, by-pass, valves, and water connections.
Covers gas line installation, pipe sizing, sediment traps, and pressure testing.
Details indoor/outdoor venting, air supply, vent adaptors, and installation clearances.
Explains electrical connections, voltage, and provides the unit's wiring diagram.
Guides on heater operation, ignition, safety controls, and module failures.
Introduces the DDTC, its display indicators, and setup procedures.
Covers DDTC display indicators, error codes, modes, setup, and remote control operations.
Addresses DDTC error codes, general troubleshooting, and ignition module issues.
Covers routine maintenance, energy saving, seasonal operation, and water chemistry.
A detailed list of replacement parts with item numbers and part numbers for different models.