Pentair ONGA - User Manual

Questions and Answers

V
Vernon SullivanJul 27, 2025
How to fix Pentair Lighting Equipment spa blower that will not start?
- M
  Monica HowardJul 27, 2025
  If your Pentair Lighting Equipment spa blower isn't starting, begin by checking that the power point is switched on and the spa blower is properly plugged in, and inspect the fuses. Next, verify that the air line is correctly connected from the air button to the spa blower and ensure the air line isn't kinked. If kinks are present, remove them to allow proper air pulse to the micro switch. Check micro switch operation. If, after checking these, the spa blower still doesn't start, remove it and take it to the nearest Pentair Water service agent.
M
Michele GarciaAug 3, 2025
What to do if Pentair Lighting Equipment spa blower operates then stops?
- M
  Mercedes WashingtonAug 3, 2025
  If your Pentair Lighting Equipment spa blower operates and then stops, cutting out on thermal overload, it could be caused by a blockage or insufficient air holes. Check the installation of the spa blower pipe work to ensure it meets specifications. If the plumbing is correct, it is recommended to remove the spa blower and take it to your nearest Pentair Water service agent.
M
Monique ClarkAug 10, 2025
Why is Pentair Lighting Equipment spa blower making a grinding noise?
- N
  Nicholas JacksonAug 10, 2025
  If your Pentair Lighting Equipment spa blower is making a grinding noise during operation, the bearings or brushes may need replacing.
S
Summer PalmerAug 18, 2025
What does it mean if Pentair Lighting Equipment spa blower makes a noise when stopping?
- M
  Michelle ChavezAug 18, 2025
  If your Pentair Lighting Equipment spa blower makes a noise when stopping, this indicates that the check-valve is operating correctly.