Pentair SPECTRACOOL series - General Information and Setup Guide

© 2015 Pentair Equipment Protection
89116616
- 5 -
GENERAL INFORMATION
STANDARDS, CE, DECLARATION OF CONFORMITY
Authorizedby:
  7/15/2014
TomHurney    Date
Manager,Lab&Certifications

Subject to Change Without Notice DOC: 00001 -A
PENTAIRTECHNICALSOLUTIONS
2100HoffmanWay
Minneapolis,MN55303‐1745,USA
+1.763.421.2240main
DeclarationofConformity
Issued by Manufacturer
Pentair Technical Products China dba Hoffman
Air Port Industrial Zone
Shuangyuan Road South
Chengyang District
Qingdao,
Shandong 266108 China
declare at our sole responsibility, that these devices are designed and constructed according to the fundamental safety and health
requirements of the relevant EC directives.
Equipment Description: S0603X6GXXX, S0605X6GXXX, S1010X6GXXX, S1015X6GXXX, S1620X6GXXX,
S1625X6GXXX, S1640X6GXXX
Product Name: “ SpectraCool SLIM Fit” Control Cabinet Air-Conditioner
First Year of CE Marking: 2014
Ingress Protection: IP 34 – Ambient Side, IP 54 Enclosure Side
Applicable Directives: Directive /95/EC Low Voltage Directive
Laws for electrical equipment within certain voltage limits
Directive /108/EC EMC Directive relating to
Electromagnetic compatibility
Directive /65/EU on the restriction of the use of certain hazardous substances in
electrical and electronic equipment
Applicable Standards:
EN 378-1 and -2 Refrigerating systems and heat pumps-safety and environmental
requirements
EN 12100-1 and -2 Safety of machinery, equipment and facilities
EN ISO 13857 Safety of machinery-safety distances to prevent hazard zones being
reached by upper and lower limbs
EN 60335-1 and -2-40 Appliances-Safety, Particular requirements for electrical heat
pumps, air-conditioners and dehumidifiers
DIN EN 14511-2 (4) Air conditioner, Test conditions
DIN EN 14511-3 (4) Air Conditioner, Test methods
DIN EN 14511-4 (4.2, 4.5, 4.6) Air Conditioner, operating requirements
DIN 3168-4.5 Coolers for distribution boxes, concepts testing, marking
EN 61000-6-2 Electromagnetic compatibility (EMC)- Part 6-2: Generic standards -
Immunity for industrial environments
EN 61000-6-3 Electromagnetic compatibility (EMC)- Part 6-3: Generic standards –
Emission standard for residential, commercial, and light industrial environments
EN 60529, IEC 60529 Degrees of protection provided by enclosures (IP code)
EN 50581: Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances
DIN 45635 Measurement of noise emitted by machines, airborne noise emission
For official DoC, go to http://www.pentairprotect.com/en/na/Compliance
