Pentax 645 Z - E-Dial Programming; Button Customization

R20
Rec. Mode Menu
A
For each exposure mode, you can select the parameters for
when Q and R are turned and M is pressed.
1 Select [E-Dial Programming] in A4 menu and
press D.
The [E-Dial Programming] screen appears.
2 Select an exposure mode and press D.
The screen for the selected exposure mode appears.
3 Select the desired setting for
each exposure mode and
press E.
4 Press F.
The [E-Dial Programming] screen reappears.
Repeat Steps 2 to 4.
5 Press F twice.
Memo
• If you select [Rotation Direction] in Step 2, you can reverse the
effect obtained by turning Q or R.
You can set the functions for when O, I or 8 is pressed, or
when the main switch is turned to U.
1 Select [Button Customization] in A4 menu and
press D.
The [Button Customization] screen appears.
2 Select the item to set and
press D.
The screen to set the function for the
selected item is displayed.
3 Select a function and press E.
The following functions can be assigned to each button.
E-Dial Programming
A4
I Change Shutter Speed
J Change Aperture Value
ISO Change Sensitivity
e EV Compensation
XG Return to G Mode
GSHIFT Program Shift
GLINE Program Line
-- Not available
Exposure Mode
Exposure Mode
Cancel
Cancel
OK
OK
Button Customization
A4
Setting Function Page
RAW/Fx
Button
One Push File
Format
Temporarily changes the file
format.
p.R21
Optical Preview
Activates the Optical Preview.
w p.67
Digital Preview Activates the Digital Preview.
AF
Button
Enable AF1
Autofocus is performed when
I is pressed.
w p.44
Enable AF2
Autofocus is performed when
I is pressed and not when
the shutter release button is
pressed halfway.
Cancel AF
While I is pressed,
autofocus is not performed
even when the shutter
release button is pressed
halfway.
Button CustomizationButton Customization
RAW/Fx Butt onRAW/Fx Button
AF ButtonAF Button
Preview DialPreview Dial
Illumination ButtonIllumination Button