Pentax 645 - PROBLEMS AND REMEDIAL SOLUTIONS

PROBLEMS AND REMEDIAL SOLUTIONS
• Under thtf following conditions, the shutter
release action will not be possible even though
the shutter release button is depressed.
1. Main switch is not turned ON.
2. Batteries in the grip are depleted; no batteries
in the glip; or the batteries incorrectly loaded.
3. Film holder without a film has been installed in
the camera's film chamber.
4. The available film frames have been
completely exposed.
5. During photographic operations.
• Should the exposure counter not register "1" or
should a non-A lens be used even if the film be
loaded in the camera, any photographic mode
setting, or shutter speed and/or f/stop
adjustments will not function. When an A lens is
not set at "A", the photographic modes available
at "A” (auto) position will be prevented.
Also refer to Item 3 on the previous page.
• Film holder exchange is not possible in mid-roll.
When the film holder is removed from the camera
in mid-roll, the properly exposed film may be
totally damaged and the LCD exposure count
display returns to the starting position (no
indication).
15