Pentax 645 - Page 57

compensation index in use will be indicated on the
EF display in the external LCD window. The + or
— LED flickering sign in the viewfinder above the
f/stop information will also be seen. Return to "0"
position immediately following use. Exposures may
be compensated automatically by adjusting the
shutter speed in Aperture-priority AE, the f/stop
in Shutter-priority AE, and the programmed
value in the Programmed AE.
When photographing in Metered manual mode, the
correct exposure sign ' OK' must be first obtained,
then compensate by adjusting the shutter speed or
f/stop.
In LS, 60 and B mode, exposure compensation
does not work although due information is
displayed.
0
-2
55