Pentax A3000 - Film Loading Procedures

LOADING FILM
2
Always
load
or unload film
in
the camera
in
a
shady
spot,
or shield it from
direct
sunlight with
your
body.
1. As illustrated,
unfold
the rewind
crank
by
pushing
it with
your
finger-nail.
2. Pull
the rewind knob
upwards until
the back
cover
snaps open.
3.
Slide the
f ilm
cartridge into
the
f
ilm
chamber
with
the flat
side up. Lock
the
cartridge in
place
by
pushing
the
rewind
knob
down, rotating
it
slightly making
sure that
it
grips
the
spool.
o10
Keep the DX-information
pins
free from
scratches,
dirt,
dust, etc.
{}
f
itm
chamber
{} Guide
rails
@
Sprocket
teeth
@ Spool teeth
€}f
itm leader
end
mark
@
DX-information pins
www.orphancameras.com