17
• In the manual zoom mode, refer to the LCD
panel and set it so the flash coverage matches
the lens focal length or set a flash coverage
that is shorter than the lens focal length.
• When the wide - angle panel is used, the zoom
button will not work. (The wide-angle panel is
in a slit on the top of the flash head. Pull it out
so that it covers the front of the flash head. If
the catchlight panel is not necessary, leave it
in the slit.)
16
Setting the flash coverage
With the setting switch set to the [white dot],
press the ZOOM button to set the suitable flash
coverage matching the lens focal length.
q Auto Zoom (Auto lighting angle adjustment):
[A. Zoom]
When autofocus cameras are used with FA J,
FA, F or FA645 lenses, the appropriate
lighting angle will be automatically set.
• Auto Zoom will not function when set to Auto
Flash [A].
• When using with Auto Zoom, make sure that
[A. Zoom] is shown on the display panel.
w Manual Zoom (Manual light angle
adjustment): [M. Zoom]
When using lenses that are not Auto Focus
compatible (A lenses, A645 lenses, 67
lenses, etc.), adjust the lens focal length
manually.
To Next Page
Loading...
