Pentax IQZoom 135 M - Film Loading; Loading Film into the Camera

FILM LOADING
9
1 Slide the back cover release lever down
and pull the back cover.
2 Place the film cartridge In the film cham¬
ber by fitting the flat side onto the top of
the rewind shaft first and then slide the
top end of the film cartridge Into the cam¬
era.
3 Pull the film leader out far enough from
the cartridge to reach the take-up spool.
Align the tip of the film with the film leader
end mark O and ensure the film is placed
properly between the film guides.
If there is dirt on the film detector Q, film can¬
not be wound properly.
Ensure the film is taut as illustrated on the illus¬
tration, Take up any slack in the film by push¬
ing it back into the cartridge.
12