120
Shooting Functions
4
5
Use the four-way controller (45) to select hours,
minutes, or seconds, and use the four-way controller
(23) to set the time.
Press the 4 button to complete the setting.
6
Use the four-way controller (23) to select [Start Interval],
and press the four-way controller (5).
7
Use the four-way controller (23) to select [Now] or [Set
Time], and press the 4 button.
If you selected [Now], proceed to Step 10.
8
Use the four-way controller (23) to select [Start Time],
and press the four-way controller (5).
9
Use the four-way controller (45) to select hours or
minutes, and use the four-way controller (23) to set the
time.
Press the 4 button to complete the setting.
10
Use the four-way controller (23) to select [Start
shooting], and press the 4 button.
After the message [Press the shutter release button to start interval
shooting] appears, the monitor turns off.
11
Press the shutter release button halfway.
The autofocus system operates.
12
Press the shutter release button fully.
When [Start Interval] is set to [Now], a picture is taken immediately,
Instant Review is displayed, and then the monitor display turns off. After
the shooting ends, [Interval shooting complete] is displayed, and then the
camera turns off.
When recording with Interval Movie, use the AC Adapter kit K-AC1202
(optional) or install a fully charged battery. If the battery is not sufficiently
charged, it may become depleted during recording and cause recording of the
movie to stop.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
