179
Playback Functions and Image Editing
6
3
Connect the other end of the cable to the input terminal on
the AV device.
4
Turn the AV device and camera on.
The camera turns on in video mode or HDMI mode, and the camera
information is displayed on the screen of the connected AV device.
Set the video/HDMI output format according to the connected terminal.
Normally, the output format initially set does not have to be changed.
However, if it fails to play back images properly, change the setting.
When the hometown is set at the time of initial setting (p.50), the video
output format is set in accordance with that region. Depending on the
country or region, images may fail to be played back with the set video
output format. If this happens, change the setting.
1
Select [Interface Options] in the [R Set-up 2] menu, and
press the four-way controller (5).
The [Interface Options] screen appears.
2
Use the four-way controller (23) to select [Video Out],
and press the four-way controller (5).
3
Use the four-way controller (23) to select [NTSC] or
[PAL], and press the 4 button.
• You cannot output composite and HDMI video signals at the same time.
• You cannot adjust the volume on the camera while the camera is connected
to an AV device. Adjust the volume on the AV device.
• When using the video output, movies are played back with monaural sound.
• When using the video output, images are output at normal resolution
regardless of the resolution supported by the AV device. To output HD video,
use the HDMI output or transfer to and play back on a computer.
Setting the Video/HDMI Output Format
Selecting the Video Output Format
To Next Page
Loading...
Need help?
General
Weight and Dimensions
