•
, r • Corrections can only be made when using DA, DA
L,
D FA or some FA
lenses. [Lens Correction] cannot be selected when
an
incompatible lens
is
attached. (p.297)
• The Lens Correction function is disabled when using an accessory such as a
close-up ring or rear converter that is attached between the camera and the
lens.
• When the Lens Correction function is activated, it may take longer to display
Instant Review and the shooting speed for continuous shooting may be
slower.
• The effect of the Lens Correction function may be barely noticeable
in
some
cases due to the shooting conditions or other factors.
1
Select
[Lens
Correction]
in
the
[0
Rec.
Mode
1]
menu
and
press the four-way controller
(.,..
).
2
The [Lens Correction] screen appears.
Use the four-way controller (
_.
T)
to select [Distortion
Correction] or [Lat-Chromatic-Ab Adj].
II[§) a
en
:::r
0
0
~
::s
Press the four-way controller (.,..)
and use the four-way controller
(•
T)
to select [OFF] or [ON].
(Q
en
(I)
....
~
::s
(Q
en
4 Press the
OK
button.
5 Press the MENU button twice.
The camera is ready to take a picture.
If'''"'' When a compatible lens is attached and the file format is set to [RAW] or
memo
[RAW+], the correction information is saved as a RAW file parameter and you
can select [On] or [Off] when developing the RAW images. (p.238)
To Next Page
Loading...
