Pentax K-5 II S - Setting the Image Finishing Tone

Adjusting the Composition
Adjusts
the
Shake
Reduction
unit
in
the
X-Y
direction
or
rotation direction
for
a
better
composition
position
and
a
more
level
camera.
Use
this
when
you
want
to
adjust
the
composition,
such
as
when
using a tripod.
1
Select
[Composition
Adjust.]
in
the
[0
Rec. Mode 2]
menu
and press the four-way
controller (
~
).
The [Composition Adjust.] screen appears.
2
Select
[Start
Adjustment]
and
press the
OK
button.
To
start adjusting the composition from
the previous position, use the four-way
controller (
.._
..-)
to select [Recall
Previous Position] and use the four-way
controller (
~
~)to
switch to
~.
Live View is displayed and the
composition can be adjusted.
3
Adjust
the
composition.
The amount
of
compensation (the
number
of
steps) is displayed at the top
right
of
the screen.
Available
operations
Composition
Adjust.
Start
Adjustment
Recall
Previous
Position
D
Please note: depending
on
the
lens,
adjusting the composition
may cause vignetting
Four-way controller
(A
...
~
.....
)
Moves the composition
up,
down, left or right.
Adjust
up
to
24
steps (approximately ±1.5 mm)
on
the image sensor.
Rear e-dial (
..
#~~--)
®
button
Adjusts the
level of the composition when the
amount of adjustment
is
less
than
16
steps
(±1.0
mm)
up
or down, or
to
the
left
or right.
Up
to
8
steps (approximately
±1
°)
can
be
adjusted.
Resets the adjustment
value.
•
en
:::r
0
0
e.
:::s
cc
en
CD
=:.:.
:::s
CQ
t/)