In
rare cases, the camera may not operate correctly due to static
electricity. This can be remedied by taking the battery out and putting it
back
in
again. When the mirror remains
in
the up position, take the battery
out and put it back
in
again. Then, the mirror will retract when the camera
is turned on again. After these procedures are done, if the camera
operates correctly, it does not require any repairs.
We recommend checking the following items before contacting a service
center.
Problem
Cause Remedy
The camera
The battery is not Check if a battery
is
installed. If
not,
install a
installed
fully
charged battery.
does not turn
on
The battery power Replace with a
fully
charged battery or use
is low the AC adapter kit (optional). (p.52)
The
lens
aperture
Set
the lens aperture ring to the
A
position
or
select
[Permitted]
in
[27. Using Aperture
ring is set to other
Ring]
of
the
[C
Custom Setting 4] menu.
than the
A
position
(p.89, p.299)
The shutter
The built-in
flash
is
cannot be
charging
Wait
until
charging is finished.
released
There
is
no
available
Insert an
SO
Memory Card with
available
space
on
the
SO
space or
delete
unwanted images. (p.54,
Memory
Card
p.74)
Recording
Wait until
recording is finished.
Autofocus cannot focus
well
on subjects
that have low contrast (the sky, white
walls,
etc.), dark colors, intricate designs, rapidly-
The subject is
moving objects or scenery shot through a
window
or
a
net-like
pattern. Lock focus on
difficult to focus on
another object located
at the same distance
as your subject, then aim at the target and
Autofocus
press the shutter release
button fully.
does not work
Alternatively,
use manual focus. (p.116)
Position
the
subject
in
the
focus frame
in
the
The subject is not middle of
the
viewfinder.
If
the
subject
is
outside
in
the focusing
the
focusing
area,
aim
the
camera
at
the
subject
area
and
lock
the
focus,
then
compose a picture
and
press
the
shutter
release
button
fully.
The subject is too Move away from the subject and take a
close
picture.
•
~
J>
"C
,
CD
::::s
Q.
)("
To Next Page
Loading...
