Pentax Optio E10 - Erasing Images

EN-10
Erasing Images
1. Press the button.
 The last image will be displayed
on the screen.
2. Use the four-way controller (WX) to
select the image you want to delete.
3. Press the button.
4. Use the four-way controller (ST) to
select [This Image] or [All Images]
by your preference, then press the
button.
5. When the delete message appears,
use the four-way controller (ST) to
select [OK], then press the
button to confirm the deletion.
 If you wish to cancel the deletion,
select [Cancel].