EN-11
TRANSFERRING RECORDED IMAGES AND
MOVIES TO YOUR COMPUTER
Setting Up Your Digital Camera
After installing the necessary software on your computer, you must now
set up your digital camera to transfer images from the camera to your
computer.
The USB driver included in the CD-ROM (S-SW47) is exclusively for
Windows 98/98SE. For more details on driver installation process, you
can refer to your Operating Manual.
Setting the USB Connection Mode to [PC]
1. Rotate the mode dial to and turn
your camera on by pressing the
Power switch.
2. Press the four-way controller (X) to
select the [Set-up2] menu, then use
the four-way controller (T) to select
[USB Con.].
3. Press the button.
4. Use the four-way controller (T) to
select [PC], then press the
button.
To Next Page
Loading...
Need help?
General
