Pentax Optio E50 - Functions per Shooting Mode

139
9
Appendix
Functions Available for Each Shooting Mode
Yes: Can be set and function is available.
- : Fixed setting. Cannot be changed.
# : Can be set but function is not available.
No : Cannot be set.
b RAd O c Y
q
<
i
I
\
E
, (Auto) Yes
Yes
*11
Yes
*11
No No No Yes Yes Yes
*9
Yes
*11
Yes
a (Flash Off) Yes Yes Yes Yes - No Yes Yes Yes
*9
Yes Yes
b (Flash On) No
Yes
*11
Yes
*11
Yes No No Yes Yes Yes
*9
Yes
*11
Yes
c (Auto + Red-eye) No Yes Yes No No No Yes Yes Yes
*9
Yes Yes
d
(Flash On + Red-eye) No Yes Yes Yes No No Yes Yes Yes
*9
Yes Yes
g (
Self-timer ) Yes
*1
Yes Yes Yes Yes No Yes Yes Yes
*8
Yes Yes
Z
(2 sec. Self-timer) Yes
*1
Yes Yes Yes Yes No Yes Yes Yes Yes Yes
1
(Continuous Shooting) No No Yes No No No Yes No Yes
*7
Yes Yes
(16-frame shooting) No No Yes No No No No No Yes
*7
Yes Yes
= (Standard) Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes
q (Macro) Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes
s (Infinity) No Yes Yes Yes Yes No Yes Yes Yes Yes Yes
3 ( Pan Focus ) Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes
Recorded Pixels - Yes Yes Yes
Yes
*2
# Yes - Yes
*10
Yes Yes
Quality Level - Yes Yes Yes
Yes
*2
# Yes - Yes Yes Yes
AF Mode - -
*6
Yes
*6
Yes Yes
*3
#Yes Yes Yes Yes
*6
Yes
Sensitivity - Yes Yes Yes - # -
*5
Yes Yes Yes Yes
EV Compensation No No Yes Yes
Yes
*4
# Yes Yes Yes Yes Yes
Movie No # # # Yes # # # # # #
Memory No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Date Imprint No Yes Yes Yes # # Yes Yes Yes Yes Yes
*1 The self-timer mode you have selected in a shooting mode other than mode can be
used.
*2 Uses the settings in [Movie].
*3 “Continuous” is not available.
*4 Not available during recording
*5 Fixed at an automatic high sensitivity setting
*6 Uses either Face Recognition AF (when the camera recognizes the subject’s face) or the
setting in [AF Mode] (if the camera does not recognize the face).
*7 In mode, “Continuous Shooting” and “16-frame shooting” are not available.
*8 In mode, “10 sec. Self-timer” is not available.
*9 In mode, setting of flash modes is not available (fixed at Flash Off).
*10 In mode, fixed at 2M. Cannot be changed on [A Rec. Mode] menu.
*11 Face Recognition AF&AE is activated when the subject's face is recognized. If the flash
is discharged, the flash mode will perform Flash On + Red-eye.