Pentax Optio E50 - Slideshow Playback

89
5
Playing Back and Deleting Images
You can play back recorded images one after another.
1 Enter the Q mode and use the four-way controller
(45) to choose an image to start the slideshow with.
2 Press the four-way controller (3).
The Playback Mode Palette appears.
3 Use the four-way controller (2345) to select u
(Slideshow).
4 Press the 4 button twice.
The slideshow starts.
Pressing the 4 button during the slideshow pauses the slideshow. To
resume the slideshow, press the 4 button while the slideshow is paused.
5 Press any button other than the 4 button or the power switch.
The slideshow stops.
You can set the playback interval and also a screen effect and sound
effect for when one image changes to the next.
1 Press the four-way controller (3) in Q mode.
The Playback Mode Palette appears.
2 Use the four-way controller (2345) to select u
(Slideshow).
Slideshow
If you press the four-way controller (5) while playing back a movie,
the next image is displayed without ending the slideshow.
Setting the Slideshow Conditions
MENU
Slideshow
Slideshow
OK
OK
OK
Cancel
Cancel
1, 2, 3
4