140
6
Editing and Printing Images
1 In the printing mode selection screen, use the four-way
controller (23) to select [DPOF AUTOPRINT].
2 Press the 4 button.
The DPOF settings you have made appear.
Use the four-way controller (
45
) to check
the number of copies for each picture, whether
to insert the date or not, and the total number
of copies. Refer to p.133 for instructions on
how to make the DPOF settings.
3 Press the 4 button.
A confirmation dialog appears.
Refer to Steps 7 to 11 of “Printing Single Images” (p.137 and p.138) for
details of changing print settings.
4 Press the 4 button on the print settings confirmation
screen.
The images are printed according to the settings.
Press the 3 button to cancel printing.
Disconnect the USB cable from the camera and printer when you have
finished printing.
1 Turn off the camera.
2 Disconnect the USB cable from the camera and printer.
Printing Using the DPOF Settings
Disconnecting the Cable from the Printer
Copies
Total
Print
Date
01
P r i n t w i t h
DPOF
s e t t i n g
Print with
DPOF
setting
OK
10
MENU
100
-
0017
100
-
0017
Cancel
Cancel
To Next Page
Loading...
Need help?
General
