Pentax Optio M30 - Using the Power Saving Function; Configuring Automatic LCD Monitor Turn-off

158
8
Settings
You can save battery power by setting the LCD monitor to turn off
automatically when no operation is performed for a fixed time. After the
power saving function has been activated, you can turn the LCD monitor
on again by pressing any of the buttons.
1 Use the four-way controller (23) to select [Power
Saving] on the [H Setting] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23)
to select [2min], [1min], [30sec],
[15sec], [5sec] or [Off].
4 Press the 4 button.
The Power Saving setting is saved.
Using the Power Saving Function
Power Saving does not function in the following situations:
• in Playback mode
• while the camera is connected to a PC or printer
• when using the AC adapter
• while recording a movie
• while the menu is being displayed
Setting
03/03/2007
Language/
MENU
1/3
Format
Sound
English
Date Adjust
World Time
Exit
How to display the [u Setting] menu
MENU
3 button
4 button
Four-way controller
Setting
Folder Name
PC
USB Connection
Video Out
NTSC
2/3
MENU
Brightness Level
Power Saving
Cancel
OK
OK
Off
5sec
15sec
30sec
1min
2min