Pentax Optio M30 - Setting the Image Sharpness (Sharpness)

92
4
Taking Pictures
R A d c Y
You can give the image sharp or soft outlines.
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Sharpness].
3 Use the four-way controller (45)
to change the sharpness level.
The following setting is saved.
F (Soft)
G (Normal)
H (Hard)
4 Press the 3 button.
The Sharpness setting is saved and the camera returns to capture
status.
Setting the Image Sharpness (Sharpness)
If you use the [Sharpness] function frequently, you can save time by
assigning it to the Green button. (p.55)
Rec. Mode
MENU
Exit
E x i t
Exit
1/3
7 M
Recorded Pixels
Quality Level
White Balance
Focusing Area
Sensitivity
AWB
ISO
AUTO
MENU
2, 3
1, 4
Rec. Mode
Exit
E x i t
Exit
Sharpness
Saturation
Contrast
MENU
3/3
S