Pentax Optio S45 - Setting the Functions (Program Mode)

49
Taking Pictures
4
In R (Program) mode, the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode or continuous shooting mode.
1 Set the mode dial to R.
2 Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.65 to p.81) for details of how to set the
functions.
3 Press the shutter release button
halfway.
The focus frame turns green if the subject is in focus.
4 Press the shutter release button fully.
The picture is taken.
Setting the Functions (Program Mode)
Taking Still Pictures 1p.30
3, 4
1
44
10:25
1 0 : 2 5
10:25
06/10/2005
0 6 / 1 0 / 2 0 0 5
06/10/2005